Question : How to setup WEP (wireless security) for DI-524?
Please note use only hard-wired network connections, to do the setting.
** Disable firewall in your PC to avoid login problem**
Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using Network cable.
Step 2 Launch your IE (Internet explorer) and key in 192.168.0.1 in the address column and press enter.
Step 3 Enter your Username: admin and no password (if it is default) click on OK
Step 4 You will see a Dlink WebPage shown as below.
Step 5 Click on the Wireless button at the left hand side of the browser.
Click on Home > wireless > Security > choose WEP
IF you choose HEX
For 64Bit you have to enter 10 characters from 0 ~ 9, A ~ F
For 128Bit you have to enter 26 characters from 0 ~ 9, A ~ F
IF you choose ASCII
For 64Bit you have to enter 5 characters (A ~ Z, 0 ~ 9)
For 128Bit you have to enter 13 characters (A ~ Z, 0 ~ 9)
It’s highly recommend to use HEX
Step 6 After Setting up your WEP key, click on Apply.
Step 7 You are done for the Router part of the WEP (security key / network key ) setting.
D-Link Blog
