How to: Configure Preset Positions on DCS-5222L
How to: Configure Preset Positions on DCS-5222L
Step 1: Connect the power of the camera and connect LAN cable from the camera to your router.
Step 2: Run the CD that come with the camera on your computer.
Step 3: Click on next
Step 4: Put a tick in the box beside ‘I accept these terms and conditions.’ Click on Next
Step 5: Click on Next
Step 6: Click on Next
Step 7: Click on Next
Step 8: Click on Next
Step 9: Click on Yes.
Step 10: Copy down the IP address of the DCS-5222L show in the list.
Step 11: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar.
Step 12: Enter the camera user name and password that had set during setting up of the camera. Click on OK.
Step 13: Click on Setup > PTZ setup.
Step 14: Under the PRESET section, configure the following;
1. Select the position by navigating the joystick on which part you want to set.
2. Select a number to add the preset position to.
3. Enter a name for the Position that you have set
4. Click on Add.
Step 15: After clicking on Add, the new Preset Position will be now be added on the Present List. Select the Preset Position from the drop down list of Preset List. Click on add.
Repeat Step 13 and Step 14 if you wish to add another Preset Position.
Thank you