Bidirectional SFP Transceiver 1 Port 10GBASE-LR (without DDM) for singlemode fiber optic cable, power supply 3.3V (up to 20km), WDM (TX: 1330nm, RX: 1270nm)

• Small Form Factor Pluggable (SFP) Multi-Source Agreement (MSA) Specification Compliant
• IEEE 802.3u 100BASE-FX Standard
• 15 km Single-Mode Fiber
• Hot-Swappable
• FDA, CDRH, TUV Laser Eye Safety Certified

- Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink

- Hot Pluggable

- IEEE 802.3ab 1000Base-T Compliant

- Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712

•  Up to 300 Mbps Wireless Speed Performance in either the 2.4 GHz or 5 GHz Band

•  2x2 MIMO embedded antenna with 4 external antenna connectors

•  Support self-configuring cluster  to enable effortless provisioning

•  Up to 32 virtual access points (VAP) may be created from a single access point

•  Wi-Fi Multimedia™ Quality of  Service makes an ideal AP for audio, video, and voice application.

•  Up to 16 SSIDs  per frequency band and 32 SSIDs per AP

•  802.3af Power Over Ethernet enables installation at hard to reach locations

•  Support Dynamic Auto-Channel Selection in Standalone Mode

•  Support Load balancing to optimise high network traffic volume and redundancy

•  Automatic RF Adjustment and management in densely AP deployment

• Cost-effective solution for 10G fiber connection
• Small form factor, allowing higher port densities for 10G connections
• Lower power dissipation
• Hot-pluggable
• Compliant with Ethernet 802.3ae
• Compliant with fiber MSA (Multiple Source Agreement)

This media converter combines transmit and receive signals onto one fiber strand using two wavelengths. This design avoids the budget losses incurred by the single-wavelength single-fiber technology, and minimizes the possibility of reflections in the system

• Four Gigabit Ethernet port with one hard Drive Extension Slot • Manage up to 64 wireless APs and upgradable to 256 APs per controller • Manage up to a maximum of 1024 APs in a Controller cluster • Self-healing and self-optimizing technology combined with 4+4 wireless controller redundancy and RF scanning • Concurrent Captive Portal for authentication users in wired or wireless deployment • Centralized RF,Security , Firewall, VPN, Content Filtering and Policy Management • Support 802.1x port-based access control and guest VLAN • Wireless Intrusion Detection & Prevention System (WIDS)

The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa.

•  High combined data rates of 1167 Mbps (AC 867 Mbps + N 300 Mbps) over the air

• Beamforming technology Bandsteering for efficient traffic management

• Support 8 units to form a  self-configuring cluster  to enable effortless provisioning

• Up to 32 virtual access points (VAP) may be created from a single access point

• WMM Quality of  Service (QOS) makes an ideal AP for audio, video, and voice application.

• Up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• 802.3at Power Over Gigabit Ethernet enables installation at hard to reach locations

• Support Dynamic Auto-Channel Selection in Standalone mode

• Support Load balancing to optimise high network traffic volume and redundancy

• Automatic RF Adjustment and Auto Power management in densely AP deployment

D-Link 10GBASE-ER SFP+ Module, Singlemode, 1550nm, 40km, Duplex LC Connector

• IEEE 802.11 AC wireless standard with up to 1200 Mbps Speed

• Concurrent Dual Band operation for Increase Network Capacity

• Gigabit LAN with 802.3af Power over Ethernet support

• Automatic Network Traffic Prioritization with WMM QoS Feature

• Support Up to 26 dBm high power design

• Band Steering and Bandwidth Optimization support

• Multiple operating modes - AP, (WDS) with AP,WDS/Bridge & Client

• Support AP Array and Central WiFi Manager (CWM)

• Network Access Protection (NAP)

High performance, flexibility, fault tolerance, and advanced software features for SMBs, SMEs, large enterprises, and ISPs.

• 20 x SFP ports • 4 x Combo 10/100/1000BASE-T/SFP ports • 4 x 10G SFP+ ports • 6 kV surge protection on all RJ-45 access ports • Switch Resource Management (SRM) for flexible management of system resources • Redundant Power Supply (RPS) support • MPLS L2VPM/L3 VPN support • Full L3 routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6 • SDN-enabled switch, compatible with Openflow 1.3

• • More Powerful PoE
• • Bring Power Anywhere
• • More Flexibility

• 16 x 10/100/1000BASE-T ports • 2 x Gigabit SFP ports • 2 x 10G SFP+ ports • Layer 2 management and security with Layer 3 capabilities • Static Routing and MSTP

• 1000Base-LX port (IEEE 802.3z standard)
• Duplex LC connector
• Very low jitter
• Full duplex operation
• 802.3x flow control support
• Fibre type: 9/125 um single-mode fibre (up to 80 km.)
• Wavelength: 1550 nm.
• Power support: 3.3 V.
• Power budget: 22dB
• Low power dissipation <700mW
• Hot pluggable
• Class 1 laser product (complies with EN60825-1)
• TTL signal detect indicator
• Metal enclosure for lower EMI

• 24 Port 10/100 Base-T PoE Switch with 2 x 10/100/1000 Base-T/SFP Combo Ports

• Support IEEE 802.3af  and 802.3at PoE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

•  Support Auto Surveillance VLAN (ASV), Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

• IEEE 802.11n wireless • High-speed wireless speeds of up to 300 Mbps • Gigabit LAN port • Traffic control/QoS • Supports WPA2™ - WiFi security for more protection • Supports 802.3af Power over Ethernet • Wall and ceiling mounting brackets included

This converter converts 1000BASE-T twisted-pair signals to 1000BASE-SX/LX multi-mode/single-mode fiber signals.

- 1000BASE-LX port (IEEE 802.3z standard) - Duplex LC connector - Full duplex operation - 802.3x flow control support - Fiber type: 9um single-mode fiber up to 10 km - Wave length: 1310nm - Power support: 3.3V - Power budget: 10.5dB - Hot pluggable - Class 1 laser product complies with EN 60825-1 - TTL signal detect indicator - Metal enclosure for lower EMI

• 8 Port 10/100 Base-T POE Switch

• Support IEEE 802.3af POE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

- 1000BASE-SX port (IEEE 802.3z standard) - Duplex LC connector - Full duplex operation - 802.3x flow control support - Fiber type: 50um or 62.5um multi-mode fiber up to 550 m - Wave length: 850nm - Power support: 3.3V - Hot pluggable - Class 1 laser product complies with EN 60825-1 - TTL signal detect indicator - Metal enclosure for lower EMI

• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports

• Support 2 x 10/100/1000 Base-T/SFP Combo Slots

• IEEE 802.1Q Virtual LAN (VLAN)

• Support  IGMP and MLD Snooping

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

This 16-slot chassis can hold up to 16 media converters. The chassis provides 19-inch standard rack-mount housing for the media converters, the power necessary for the media converters, plus optional redundant power supplies and SNMP/web-based network management.

-Precision Monitoring

-Weatherproof and Vandal-proof for Outdoor Applications

• 24 x 10/100/1000BASE-T PoE ports • 2 x Gigabit SFP ports • 2 x 10G SFP+ ports • Layer 2 management and security with Layer 3 capabilities • Static Routing and MSTP • 193 W PoE budget

Enjoy High-performance Wireless Connectivity - Harness the power of IEEE 802.11ac Wave 2 wireless and experience wireless speeds of up to 1300 Mbps, perfect for high-demand business applications MU-MIMO with Beamforming - Dramatically improves the wireless range and performance as well as allowing multiple devices to connect simultaneously to the wireless network Multiple Operational Modes -Flexible options allows the DAP-2610 to function as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client